Message Forum: Re: nuts and bolts

Re: nuts and bolts

Posted By: Mousie, on host 170.20.96.59
Date: Thursday, June 23, 2005, at 11:25:52
In Reply To: Re: nuts and bolts posted by Howard on Wednesday, June 22, 2005, at 16:55:27:

>
>
> Hex heads are measured across the center from one flat to the other. Therefore, an open-end wrench with a half inch opening will fit a half inch hex. Box ends and sockets fit the flat sides all the way around. Square head bolts are more or less obselete.
> Howard

Squareheads, obsolete. Got it. Blockheads, however? Abound.

Moush

Replies To This Message

Re: nuts and bolts - Howard - Thu, 6/23/2005, 17:31:14

RinkChat Username:
Password:
Email:		(optional)
Subject:
Message:	> > > > > > Hex heads are measured across the center from one flat to the other. Therefore, an open-end wrench with a half inch opening will fit a half inch hex. Box ends and sockets fit the flat sides all the way around. Square head bolts are more or less obselete. > > Howard > > > Squareheads, obsolete. Got it. Blockheads, however? Abound. > > Moush
Link URL:		(optional)
Link Title:		(optional)

Replies To This Message

Post a Reply