Message Forum: Re: POA Circuits

Re: POA Circuits

Posted By: gremlinn, on host 66.75.44.2
Date: Tuesday, October 9, 2007, at 22:24:00
In Reply To: TOA Circuits posted by Crysti on Tuesday, October 9, 2007, at 17:06:17:

> Ok, I was looking at http://rinkworks.com/rinkforum/view.cgi?post=101840
>
> and came up with a solution based on that, but when tried it it didn't work. I have:
>
> 11 SI NI
> 16 NO SO
> 21 SI NI
> 26 NO SO
> 01 SI NI
> 06 NO SO

M01W to M06W is broken (that is, you can't point one south from M01W and you can't point one north from M06W). You have the right inner/outer connection across M21 from W to E (across the inner, since it's broken across the outer), and that forces the inner-outer pattern throughout all 12 junctions.

So you just need to start with the M01W and M06W junctions (M01W has to point north, M06W has to point south) to follow along and see how your north and south directions have to be changed elsewhere.

Post a Reply

Note: If you are posting a hint request for Adventure Games Live, be sure to specify which game you are talking about and list your inventory so other players know where you are in the game.

RinkChat Username:
Password:
Email:		(optional)
Subject:
Message:	> > Ok, I was looking at http://rinkworks.com/rinkforum/view.cgi?post=101840 > > > > and came up with a solution based on that, but when tried it it didn't work. I have: > > > > 11 SI NI > > 16 NO SO > > 21 SI NI > > 26 NO SO > > 01 SI NI > > 06 NO SO > > M01W to M06W is broken (that is, you can't point one south from M01W and you can't point one north from M06W). You have the right inner/outer connection across M21 from W to E (across the inner, since it's broken across the outer), and that forces the inner-outer pattern throughout all 12 junctions. > > So you just need to start with the M01W and M06W junctions (M01W has to point north, M06W has to point south) to follow along and see how your north and south directions have to be changed elsewhere.
Link URL:		(optional)
Link Title:		(optional)

Make sure you read our message forum policy before posting.